Start Date: September
Location: Summerside Waterfront Campus
Length: 2 Years
Credential: Diploma, Automotive Technician
Program Availability: Fall 2024 Term
Canadian Applicants: Closed
International Applicants with a Valid Study Permit: Closed
Other International Applicants: Closed
Program Availability: Fall 2025 Term
Canadian Applicants: Open
International Applicants with a Valid Study Permit: Open
Other International Applicants: Open
The Automotive Technology program provides a comprehensive introduction to the mechanical and technological skills you’ll need to work as an automotive service technician. The program gives you a solid grounding in mechanical systems, computers, networks, electronics, and non-mechanical systems you’ll encounter on the job. You will take what you learn in the classroom and apply it in ÎçÒ¹av’s on-campus Automotive Technology shop, and on-the-job training will give you the opportunity to apply your skills in the workplace.
This program is located at our Summerside Waterfront Campus. Take a
You’ll work on a fleet of diverse vehicles to develop your skills, then you will have an on-the-job training work placement where you will be in a real work environment. On-the-job training not only gives you valuable real-life experience, it also helps you build a network of potential employers.
Upon successful completion of the program, graduates will be able to:
The Red Seal gives you the ability to work anywhere in Canada without further testing or certification. The Red Seal is recognized as the Interprovincial standard of excellence for your chosen trade and is the designation most employers will ask for.
The most successful path to a Red Seal as an Automotive Service Technician begins with ÎçÒ¹av’s Automotive Technology program. You earn 30 hours of apprenticeship time for each week of training hours and write two block exams, which puts you well on your way to Red Seal certification. Once you are working with a suitable employer, you can register as an apprentice, and Apprenticeship PEI will give you credit for the hours earned and block exams passed while you were in ÎçÒ¹av’s Automotive Technology program.
This program has degree pathways, giving you the opportunity to receive credit for your ÎçÒ¹av diploma when you continue your education. For a complete list of agreements, visit the .
| Partner Institution | Credential | Details of Agreement |
|---|---|---|
| , Saint John, N.B. | Bachelor of Applied Management | Graduates with a 70% average are granted two years of credit toward a Bachelor of Applied Management degree. |
Notes:
Tuition, fees, and other costs are listed in Canadian dollars. International tuition includes the International Student Fee.
Fees are Program Based
|
1st Year |
Canadian |
International |
|---|---|---|
| Tuition | $6,035 | $12,035 |
| Fees | $888 | $1,638 |
| Other Costs | $2,150 | $2,150 |
| Total | $9,073 | $15,823 |
|
2nd Year |
Canadian |
International |
|---|---|---|
| Tuition | $6,035 | $11,135 |
| Fees | $868 | $1,618 |
| Other Costs | $460 | $460 |
| Total | $7,363 | $13,213 |
|
Tuition & Fees |
1st Year |
2nd Year |
|---|---|---|
| Tuition | $ 6,035 | $ 6,035 |
| Student Union | $178 | $178 |
| Lab Fee | $120 | $120 |
| Health Insurance Fee | $470 | $470 |
| First Aid/WHMIS | $120 | – |
| Graduation fee | – | $100 |
| Total payable to ÎçÒ¹av | $ 6,923 | $ 6,903 |
| 1st installment due first day of first semester | $ 3,846 | $ 3,826 |
| 2nd installment due first day of second semester | $ 3,078 | $ 3,078 |
|
Other Costs |
1st Year |
2nd Year |
| Books | $600 | $100 |
| Materials/Supplies | $50 | $50 |
| Uniforms/Safety Shoes/License Fee | $200 | $160 |
| Equipment/Tools/Registration Fee | $1,300* | $150 |
| Total | $2,150 | $460 |
| Grand Total | $9,073 | $7,363 |
*When they finish their first year, students will begin work placements. At this time, students will be required to purchase a set of tools. Average cost is $1,300; but will vary depending on tool quality and existing personal tool supply. A list will be provided by the instructor.
|
Tuition & Fees |
1st Year |
2nd Year |
|---|---|---|
| Tuition* | $12,035 | $11,135 |
| Student Union | $178 | $178 |
| Lab Fee | $120 | $120 |
| Health Insurance Fee | $ 1,220 | $ 1,220 |
| First Aid/WHMIS | $120 | – |
| Graduation fee | – | $100 |
| Total payable to ÎçÒ¹av | $13,673 | $12,753 |
| 1st installment due first day of first semester | $ 10,596 | $ 9,676 |
| 2nd installment due first day of second semester | $ 3,078 | $ 3,078 |
|
Other Costs |
1st Year |
2nd Year |
| Books | $600 | $100 |
| Materials/Supplies | $50 | $50 |
| Uniforms/Safety Shoes/License Fee | $200 | $160 |
| Equipment/Tools/Registration Fee | $1,300** | $150 |
| Total | $2,150 | $460 |
| Grand Total | $15,823 | $13,213 |
*International tuition includes the International Student Fee.
**When they finish their first year, students will begin work placements. At this time, students will be required to purchase a set of tools. Average cost is $1,300; but will vary depending on tool quality and existing personal tool supply. A list will be provided by the instructor.
After you graduate from ÎçÒ¹av, your apprenticeship training begins. When you register with your provincial apprenticeship program, you will receive credit for the hours earned and level exams passed while you were at ÎçÒ¹av. Learn more about apprenticeship and the Red Seal program.
Many ÎçÒ¹av programs have degree pathway agreements with other post-secondary institutions. You can receive credit for your ÎçÒ¹av diploma toward a university degree or other post-graduate credential, saving you time and money! Find out more on the Degree Pathways page.
Course Code:SAFE-1005
An overview of the Occupational Health and Safety Act of Prince Edward Island. Students examine the legislation, how PEI employees are protected while on the job and the responsibilities of employees and employers.
Credit Value:0
Course Code:AUTO-1000
An introduction to the tools and equipment used by an Automotive Service Technician. Safe and efficient work habits, selection and maintenance of tools and equipment are practiced.
Credit Value:2
Course Code:AUTO-1005
A thorough introduction to customer service, work orders, and professional demeanor as an Automotive Service Technician. Students explore and practice these skills while performing Motor Vehicle Inspections (MVI). Pre-Delivery Inspections (PDI) and preventative maintenance tasks. Students are also introduced to issues relating to body components and trim.
Credit Value:3
Course Code:AUTO-1100
This course prepares students to diagnose and repair mechanical braking systems including disc, drum, and hydraulic brakes. Student use measuring tools and procedures to ensure that components meet safety requirements and apply safety best practices while servicing brake components and systems.
Credit Value:3
Course Code:AUTO-1115
In this course students learn to analyze and service front and rear suspension systems, as well as inspect and repair tires, wheels, and wheel bearings. Students also learn to inspect and repair manual and power steering gears and steering columns, as well as how to perform two- and four-wheel alignments.
Credit Value:5
Course Code:AUTO-1210
In this course students learn the fundamentals of electricity in relation to automotive vehicles. In addition, students are introduced to basic scan tools used for diagnosing issues with automotive computer systems.
Credit Value:3
Course Code:AUTO-1221
Course Description: In this course students learn to diagnose, service and repair drivelines and axles. The training environment includes lectures, self-study and practical exercises.
Credit Value:2
Course Code:AUTO-1225
This course is designed to provide students with an overview of the various types of engine assemblies, their components, as well as how they operate. Students learn to apply formulas used to calculate engine displacement, compression ratios, and horsepower.
Credit Value:2
Course Code:AUTO-2100
This course is designed to further build on the skills taught in the Basic Electrical course, to teach students how Voltage, Amperage and Resistance can affect many electrical circuits. This course will also cover how to apply an automotive wiring diagram to the diagnostic approach to solve electrical faults. In addition, students learn how to properly set up and use advanced electrical diagnostic tools, such as Oscilloscopes.
Credit Value:3
Course Code:AUTO-2110
In this course students learn about vehicle convenience systems. Topics include; body control modules, lighting, entertainment systems, anti-theft systems, as well as other instruments and safety devices found in automobiles. Students are shown how to diagnose and repair vehicle convenience systems.
Credit Value:4
Course Code:AUTO-2115
Students learn about the function of vehicle electronic and computer systems, as well as how to diagnose, repair, and test these systems.
Credit Value:2
Course Code:AUTO-2120
This course prepares students to work with ignition systems. Students learn about the function of manual and electric ignition systems, and how to conduct tests to diagnose problems, and service these systems based on their findings.
Credit Value:2
Course Code:AUTO-2130
This course prepares students to service and repair different types of fuel delivery systems. Students learn about engine drivablility and performance and use scan tools and DVOM's to verify engine sensor data, and repair performance issues.
Credit Value:5
Course Code:AUTO-2135
This course explores the various safety systems found in today's vehicles. Students learn to service and repair Electronic Brake Control (EBC) systems, as well as how to diagnose and repair occupant restraint systems. Students also investige different types vehicle driver assistance control systems designed to increase safety.
Credit Value:2
Course Code:AUTO-2150
In this course students learn about automotive heating and cooling systems, and how to diagnose and repair those systems. Students are also required to complete the requirements for Ozone Depletion Substance handling.
Credit Value:2
Course Code:AUTO-2200
In this course students learn about aspects of the engine's electrical system inlcuding how to test electrical charging systems, as well as inspect and service generators and starting systems.
Credit Value:2
Course Code:AUTO-2205
Students learn about the operating principles of differential assemblies as well as methods to diagnose and repair these systems according to manufacturer's specifications.
Credit Value:2
Course Code:AUTO-2222
Students learn how to diagnose and repair manual transmissions systems and are introduced to automatic transmission operation, maintenance and service procedures. Students also learn about the function and operation of transfer cases, as well as procedures used to diagnose, service, remove and install them.
Credit Value:5
Course Code:AUTO-2225
This course prepares students to service and repair engine cylinder heads and associated components such as valves, valve springs, and camshafts. This course also teaches students the importance of automotive cooling systems in relation to regulating an engines temperature.
Credit Value:4
Course Code:AUTO-2230
This course prepares students to service and repair engine cylinder blocks and its associated components such as crankshafts, pistons, connecting rods and oil delivery system. In addition students will learn engine diagnostic approaches to diagnose engine failures. This course also reviews the basic working principles of a 4 cycle internal combustion engine.
Credit Value:4
Course Code:COMM-1005
This course is designed to allow students to develop preparatory skills for securing and retaining employment including; workplace communication, time management, critical thinking and problem-solving, and customer service. Upon successful completion of this course students are able to use oral communications techniques, and create a variety of written documents and reports used in the workplace. Methods and strategies for job search, preparation and retention are also incorporated.
Credit Value:3
Course Code:COMP-1000
Students learn productivity software and explore digital environments with practical applications for various workplaces and educational institutions. The main areas of focus include word processing, spreadsheets, presentation software, email and other electronic communication tools, various digital environments, and industry-specific applications.
Credit Value:3
Course Code:MATH-1005
This course is designed to provide students with a review of fundamental trade related math skills. Students acquire competency in the math skills as they relate to their chosen trade program and future career. Emphasis is placed on developing problem solving and critical thinking skills. Students are challenged to continually make connections between math and their trade, as well as every day applications.
Credit Value:2
Course Code:MATH-1115
This course is designed to enable the student to develop trade related math skills. Students acquire competency in math skills as they relate to motive power programs and their future career. Emphasis is placed on developing problem solving and critical thinking skills. Students are challenged to continually make connections between math and the motive power field, as well as every day applications.
Credit Value:2
Course Code:NCPR-1001
A comprehensive two-day course offering standard first aid and cardiopulmonary resuscitation (CPR) skills from a certified trainer. As required by regulation, this course covers CPR and the management of other breathing, airway and circulation emergencies, as well as, the control of bleeding, treating shock, stabilizing fractures and dislocations, head and spine injuries, and more. Also, includes automated external defibrilators (AED). This certification expires in 3 years.
Credit Value:0
Course Code:NCPR-1002
Students complete Workplace Hazardous Materials Information System (WHMIS) training and certification.
Credit Value:0
Course Code:NCPR-2010
This environmental awareness training program, based on Environment Canada's "Code of Practice for Elimination of Fluorocarbon Emissions in Refrigeration and Air Conditioning Systems", deals with environmentally-correct equipment design, proper handling of refrigerants, and prepares participants for complying with Federal and Provincial Regulations covering refrigeration and air conditioning systems. Specific topics covered are: Science of ozone depletion, leak detection methods, system charging procedures, special maintenance provisions, and refrigerant recovery, reuse, recycle and reclamation equipment.
Credit Value:0
Course Code:PRAC-1150
Working in an automotive service shop, students gain industry experience and apply skills and knowledge gained during the preceding courses.
Credit Value:3
Course Code:PRAC-1250
Students gain industry experience and apply skills and knowledge gained during the preceding courses.
Credit Value:3
Course Code:PRAC-2250
Students gain industry experience and apply skills and knowledge gained during the preceding courses.
Credit Value:3
Course Code:WELD-1200
An introduction to basic welding and cutting operations used in the automotive trade with a focus on oxyacetalyne cutting, welding and brazing and Gas Metal Arc Welding.
Credit Value:1
